For those interested, only pins 4 and 5 on the RJ45 socket are used (TX/RX). If you’ve bought a clone Tech 2 unit I’d recommend throwing away the supplied flat RJ45/ethernet cable and replacing it with a standard ethernet cable (not cross-over) as mine was faulty and caused many headaches! The correct pin-out is provided by the RJ45 to D9 adaptor. I believe this will allow re-programming of models up to 2008 only, so if you have a later model, you’ll probably need GlobalTIS. Launch TIS2000 and click on SPS or security access to ensure it works
If you haven’t installed the USB key and patch do this now.ħ. TIS2000 should detect available update (Saab TIS-2008). Launch TIS2000 from desktop icon/start menuĥ. Insert into same physical/virtual CD drive you installed the TIS2000 GM from (drive letter needs to be the same).Ĥ. When finished, don’t run the TIS2000 program.ģ.
SAAB GLOBALTIS INSTALL
You may be prompted to install the USB key – just follow the steps. You will need a TIS2000 USB key and patch for activation (can be bought for little money or sourced elsewhere)Ģ.
SAAB GLOBALTIS SERIAL
Make sure you are confident that your serial connections are good.ġ. Here is the Install tips for TIS2000 for Saab (TIS2008-2) for Tech 2įirst, get your hands on a Tech 2 handset, CANDI and cables etc. (Install Tips)TIS2000 for Saab (TIS2008-2) for Tech 2 Works together with TECH2 SAAB Car model for programming.kindly note it supports cars before 2008. Language: English, Dutch, Spanish, Italian, German, Russian, Turkish, French, Swedish,Chinese TIS2000 CD and USB Key for SAAB work with TECH2 TIS2000 CD and USB Key for SAAB work with TECH2
0 kommentar(er)
